DVR 8-CH Specifications download pdf (Page 14)

WPS-100-DVR-8CH Installation and Users Manual

3.2 OPTIONAL CONNECTIONS

 •AUDIOINPUT

Connect the audio input connector to the audio line-out from line level microphones or other audio

sources. Please make sure to associate the audio inputs with a camera in the Camera Setup as described

in Section 6.2 accordingly. An audio input can only be associated with one camera.

 •AUDIOOUTPUT

  Connecttheaudiooutputconnectortoanamplierandspeakers.

 •ALARMINPUTS

Connect the alarm inputs to NC and/or NO sensors or security alarm panel relays. Please make sure to

  setupthealarmcongurationsasdescribedinSection 6.3 accordingly.

 •ALARMOUTPUT

Connect the alarm output to either a NC or NO type of device or system.

 •ETHERNET

Connect the Ethernet connector to router via a standard Ethernet cable for control and streaming to an

  AutomationSystem,remoteaccessviaPCorSmartphone,oreventemailnotications.

  PleasemakesuretosetuptherelatedcongurationsasdescribedinSection 6.10 Network Setup.

 •USB2.0DISKDRIVES,DVD+RW,CARDREADER,ETC.

Connect USB 2.0 peripheral devices such as thumb drives or DVD+RW drives to store important recorded

video and audio.

 •I/RREMOTECONTROL

IR receive window to control the digital video recorder with the IR remote control

 •PTZCAMERAS

Connect the RS-485 connector to PTZ camera(s) via an appropriate cable. The system supports a variety

of PTZ cameras and the OSD menu of Wirepath™ Surveillance cameras. Different PTZ cameras can

coexist in a system only if they support the same protocol and baud rate. Make sure to set unique PTZ IDs

to the cameras, the DVR and any other PTZ device. Setup each camera (Section 6.1), and RS485

(Section 6.9) accordingly.

IP Control Connections

Wirepath™ DVRs provide integration with Automation Systems via Ethernet allowing for control and streaming

of video. Connect the Ethernet port to a home automation network.

Note: This feature is only available on DVRs with software versions 7.77.53 or higher and requires the home

automation system manufacturer to provide the driver. Update the DVR to the latest version available on the

SnapAV Website to use this feature.

Thumb DriveDVD+RW

For PTZ Device:

RS485+→RxD+(Data+)

RS485-→RxD-(Data-)

GND →GND

For Wirepath

Surveillance Cameras:

RS485+→Positive

RS485-→Negative

GND→NoConnection

WPS-100-DVR-8ch

RS-232

Network

Control System

Router

Internet

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 114 115

Comments to this Manuals

No comments

DVR 8-CH Specifications Page 14

Comments to this Manuals

Related products and manuals for Digital Video Recorders (DVR) DVR 8-CH