DVR 8-CH Specifications download pdf (Page 55)

WPS-100-DVR-8CH Installation and Users Manual

Enter the Gateway IP address for the system.

 •DNS

If using DNS, enter the Domain Name Server address for the system.

 •USERNAME

If PPPoE is used, enter the Username for the system.

 •PASSWORD

If PPPoE is used, enter the Password for the system.

 •DDNSTYPE

Press +/- buttons on the front panel of the DVR or on the remote control to select the Dynamic Domain

Name Server type to Dynamic, Static, or Custom DDNS type. Contact the DDNS Service Provider to get

the DDNS type, DDNS URL, username, and password, or refer to Appendix E for details on how to use

the free service from DynDns.

 •URL

Enter the DDNS URL if DDNS is used.

 •DDNSUSERNAME

Enter the DDNS Username if DDNS is used.

 •DDNSPASSWORD

Enter the DDNS Password if DDNS is used.

 •E-MAIL

Press ENTER on the front panel of the DVR or on the remote to display the E-mail Setup menu.

Alternatively use the mouse to enter this menu. Refer to Section 6.10.1 for details.

 •FTP

Press ENTER on the front panel of the DVR or on the remote to display the FTP Setup menu. Alternatively

use the mouse to enter this menu. Refer to Section 6.10.2 for details.

 •ADV.

Press ENTER on the front panel of the DVR or on the remote to display the Advanced Network Setup

menu. Alternatively use the mouse to enter this menu. Refer to Section 6.10.3 for details.

6.10.1 E-MAIL SETUP

The E-mail Setup allows the administrator to set e-mail related parameters. When an event occurs and E-mail is

enabled for the corresponding action, an e-mail will be sent based on the parameters set in this menu.

In Network Setup, press ENTER to display E-mail Setup as shown when the highlighted option is E-mail.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 114 115

No comments

DVR 8-CH Specifications Page 55